If you think your radiators don’t look nice, you can build a radiator cover yourself to remedy the situation.
Necessary planning to build a radiator cover yourself
Radiators are functional, especially in winter, but often do not fit into the desired room concept visually. However, before you can start building the radiator cover, careful planning is essential. Here you decide not only on the design, but also on the materials that ensure both stability and good heat emission.
- First, think about what the paneling should look like and what purpose it should serve. Should it be primarily decorative or serve as additional storage space? This will influence the choice of materials and the design.
- Choose materials that are heat-resistant and suitable for indoor use, such as MDF panels, wood or perforated metal. These materials are stable and easy to work with, without affecting the heat output of your heater.
- Make sure that the covering you choose still allows sufficient air circulation.
- Measure the radiator and the available space exactly. Coverings that are too large or too small can be impractical or less visually appealing.
- Calculate the cost of materials and plan enough time for this DIY project. A simple design can be realized in a weekend, while more complex projects may take more time.
Building the panel
Once all the preparations have been made and the materials selected, it’s time to get started. Whether simple or elaborate, the construction of the frame and the choice of front design give the cladding its character.
- Start with a sturdy base frame made of wooden slats or metal profiles. The frame forms the basis for the cladding and must therefore be cut exactly and screwed on firmly.
- Once the frame is in place, attach the front and side panels to the frame. It is best to provide the front wall with a grid or other ventilation openings so as not to obstruct the heat output of your heater.
- If you want, you can also use the casing as storage space. You can use this space for decorations or smaller items, for example, giving the casing an additional function.
- Carefully sand down all corners and edges to obtain a smooth surface and to avoid injuries. Especially with wood, you should watch out for possible splinters or sharp edges.
- Consider whether you would also like to paint or coat the paneling to visually adapt it to the room. But be sure to choose heat-resistant paints that will not peel off even with intensive use.
Installing and maintaining the casing
Once the individual parts are finished, the last step is to assemble the radiator casing. A well-assembled casing should not only be stable, but also easy to remove to allow maintenance work on the heater.
- Attach the panel so that it is stable but can be easily removed. This is important to be able to clean and maintain the radiator regularly.
- Depending on the material, you should remember to clean the panel regularly to avoid dust deposits. You can treat wooden cladding with special care products to extend its lifespan.
- Check whether the heating output is being affected by the cladding. If the room takes longer than usual to warm up, it may be sensible to make adjustments and ensure better air circulation.