1.9K
If your Hoover washing machine displays error code e03, it means that your machine cannot drain the dirty rinse water. This also means you can’t open the door and get to your laundry. Therefore, read here how to fix the error code.
This is what you can do if your Hoover washing machine has error code e03.
If your Hoover washing machine displays error code e03, luckily you have several options to get your machine working again. The solution to the problem here is to check the drain pipes. If they are blocked, the dirty water cannot drain.
- Numerous household items clog drain pipes. Hair bands, hair, coins, food and grease not infrequently obstruct the drainage of dirty water.
- Most Hoover machines have a small drain pipe at the front. This allows you to drain the water in your machine first.
- If your machine does not have this small drain pipe, you must remove the water masses via the grey drain pipe at the back of the machine.
- Then check the filter of your Hoover machine. This should prevent clogged items such as hair bands or the like from entering the drain pipe. Servicing the filter is essential to clear the error code.
- Check also if there are no bends or kinks in the pipe that could obstruct the drainage of water.
- Eventually, however, it is also a matter of so-called voltage spikes, an electronic defect, which indicate the error code. Therefore, disconnect your machine from the mains for a few minutes and then switch it on again.
- It is also possible that a damaged heating element displays the error code. If this is the case, you will need to take the Hoover machine in for repair.
